Gallery

Vice-Chancellor

A competent and high performing professional offering more than 26 years of rich cross-functional experience in all aspects of Teaching, Research and administration in higher education sector. Having ability to start new academic programs efficiently and effectively in University education. Highly skilled in providing Academic, Administrative and Research oriented leadership to the University by inculcating team spirit and team work. Proven expertise in developing the curriculum of new academic programs with a focus to improve the employability of pass out graduates and post graduates.

Strategic planner to encourage inter disciplinary research by formal interaction among various departments of University, Industries and Research Institutions. Excellent exposure for encouraging a research culture to develop new research based products, processes and their applications subsequently filing their patents, finding the industries having their interest (Expression of Interest) to commercialize the product along with the process of transferring the technology. Research interest includes Waste Water Treatment, Solid waste management, Environmental issues of Industries and Energy recovery by using Plasma Technology.

Peer reviewer of large number of research papers being published in reputed high indexed National and International Journals in above mentioned research areas. Published and presented more than 60 research papers in National and International Journals and Conferences. Guided number of Ph.D., M.Tech and B.Tech projects. Also published number of Books and Chapters with National and International publishers.

Vice-Chancellor, The Maharaja Sayajirao University of Baroda
vc@msubaroda.ac.in

Phone: (O) 0265-2795600
Fax :0265-2793693

Nodal Officer (Faculty of Science)

Nodal Officer (Baroda Sanskrit Mahavidyalaya)

Problem 6

Environmental impact for Source Segregation of Solid Waste

Abstract:

It is observed that with increase in the population across globe and the rising demand for food and other essentials items, there has been a rise in the amount of waste being generated daily by each household. Waste that is not properly managed, especially excreta and other liquid and solid waste from households and the community, are a serious health hazard and lead to the spread to the spread of infectious dieses.

In order to minimize the detrimental effect of the solid waste, systematic collection, stocking of solid waste its subsequent treatment is an essential part. As solid waste, if not collected and treated well the resulting decay and/or its toxic effect may lead to severe environmental consequences and hazards to community. Perception and behavior of the citizen is fundamental to achieve this objective, as this will help reduction of the overall footprint of the solid waste.

There are three major issues concerning the treatment to solid waste and to reduce overall footprint of the solid waste of a typical urban locality it is,

• Optimizing the collection points and deciding numbers of stocking sites,
• Changing behavior of the community by undertaking different programs and
• Recommending best treatments to different solid waste i.e. dry waste and wet waste by different technology options.

The main objective is to develop mathematical model for an overall plan for collecting, stocking and processing the solid waste for a given urban community or town or village which is useful to the society so that the warming potential of the solid waste and its environmental effect can be reduced to as low as possible.

Problem 2

Study of Ferroresonance in Voltage Transformer

Abstract:

Electromagnetic Voltage Transformers (VT) when installed in an ungrounded system face ferroresonance. The over voltages caused by ferroresonance can lead to catastrophic failures of VTs. Such failures are quite common and predictable in many conditions. However, in many cases the risk of ferroresonance cannot be quantified a priori. While conditions that may lead to ferroresonance are known, the exact circuit parameters and their values which can definitely provide an answer to whether ferroresonance will occur or not is of great interest.

The problem here is to model multidimensional non linear ordinary differential equation. Perform its parametric analysis to find points of multiple solutions.

A typical circuit and its parameters will be provided

Problem 1

Hydrodynamics and Pollutant distribution on Mahi Estuary

Abstract:

Located in Madhya Pradesh and Gujarat state of India, the Narmada River previously known as Narbada is the 5th longest river in India which opened to Narmada estuary which discharges effluent into the gulf of khambhat. Narmada River pollution affects Narmada river side villages, urban areas near the river and the aquatic life. It has been observed that pollution in Narmada River is mainly caused by pollutants present in the estuary which are driven there during high tides instead of being completely driven to the Arabian Sea during low tides. We have to answer this question: what is really happening to effluent entering the gulf of khambhat during high and low tides? How much time those effluents are taken for being drained into the Arabian Sea? Our studies will focus on understanding temporal dispersal of pollutants under thermodynamic simulation of flow aspect, spatial and temporal information of pollutants. These studies will be made by developing a mathematical modelling which will help us to understand the impact of hydrodynamics in pollutant distribution.

Problem 3

Mathematical Model to diagnose Non Alcoholic Fatty Liver Disorder (NAFLD)/Non Alcoholic Steatohepatitis (NASH)

Abstract:

Non-alcoholic Steatohepatitis (NASH) is a chronic liver disease impacting one third of the world’s population and has been recognized as one of the major health burden globally. NASH has multi-faceted faceted complications associated with insulin resistance, dyslipidemia with an increased risk of diabetes and coronary heart diseases. Though, a biopsy of liver or MRI scan remains a gold standard for diagnosis of NASH, detections of its onset and progression in early stage is a challenge for researchers. The currently available NASH Index score primarily quantifies the steatotic changes observed in liver through these techniques along with few select proteins, bile acids and lipids in serum. Hence, efforts are being made to plough through the metabolomics profiles of serum and urine of NASH patients for fishing out correlates and to set a mathematical benchmark for an early detection. A scrutiny of alternations in serum and urine metabolome (experimental models and patients) can help to create a mathematical model based on for early detection of NASH and the same has been proposed herein.

Problem 5

Soft Computing techniques in optimal down-scaling of Global climate Model (GCM)

Abstract:

Global Climate Models/ General Circulation Models (GCM) are representing the simulations of current climate systems as well as future projections of climate variables. (IPCC, 2014) Climate is itself a complex system and many complexities are added with simulations and projections.

Again the relationship between local precipitation and the spatial patterns of GCM hindcasts is often very complex. There are two large groups for downscaling including dynamical downscaling (DD), which uses regional climate models (RCMs) to downscale GCMs, and statistical downscaling (SD), which aims to achieve a statistical or empirical relationship between large-scale atmospheric variables (termed predictors) and regional variables (termed predictands). SD has the advantages of a low computational cost, relatively simple implementation, and reliable accuracy. Thus, SD techniques may be convenient if the study mainly concentrates on the downscaling and projection of precipitation at a basin scale.

Multi-Model Ensembles (MMEs) are often employed to reduce the uncertainties related to GCM simulations/projections. Reliable ensemble Averaging (REA) is one of the techniques (Chandra, Saha and Mujumdar, 2015). Soft computing techniques like machine learning (ML) algorithms with different combinations of GCMs ranked based on their performance and determine the optimum number of GCMs to be included in an MME. ML algorithms; Artificial Neural Network (ANN), K-Nearest Neighbour (KNN), Support Vector Machine (SVM) and Relevance Vector Machine (RVM) can be used to develop MME of GCM. (Ahmed et al., 2020)

Dataset: NASA Earth Exchange (NEX) Global Daily Downscaled Projections (GDDP) dataset. This dataset includes downscaled projections from the 21 models and scenarios for which daily scenarios were produced and distributed under Coupled Model Intercomparison Project (CMIP5).

Study Area: Vadodara, The third largest city of Gujarat, western part of India, is situated between the latitude of 22.2° to 22.5° and a longitude of 73.1° to 73.3° grid box.

Objective: To develop Multi-Model Ensembles for future Annual Maximum Precipitation series from NEX-GDDP dataset for Vadodara using soft computing techniques. Which can be applied to develop future Intensity Duration Frequency (IDF) curves to assess impact of climate change on urban flooding.

Problem 8

Predicting Business and Stock Price Performance Using Natural Language Processing (NLP)

Abstract:

Public businesses generate a lot of data on a periodic basis. This data is quantitative in form of stock prices, earnings and qualitative in form of management interviews, annual reports, conference call transcripts and customer reviews. With this vast amount of data that is both quantitative as well as qualitative, separating signal from the noise becomes a difficult task. Using a combination of statistics and NLP, the problem aims to build a business and stock price performance model that aid in generating higher portfolio return.

While use of NLP to understand sentiment is not new, the application of the same in Indian Context as well as the use in predicting business performance is new and challenging task.

Problem 7

MATHEMATICAL MODELLING AND SIMULATION OF ELECTROMAGNETIC SHIELDING EFFECTECTIVENESS OF POLYESTER – COTTON BLENDED WOVEN FABRIC

Abstract

As the technology grows, use of electrical and electronic systems has increased enormously in all the engineering and technology fields. Any electrical apparatus such as high voltage power lines, radar, communication system, radios, televisions, household appliances, computers, mobile phones etc., generates electromagnetic waves which creates interference to the circuit of the devices and also affects human health due to prolong exposure. The disturbance may interrupt, obstruct or otherwise degrade or limit the effective performance of the circuit. These effects can range from a simple degradation of data to a total loss of data. If an electromagnetic wave gets into an organism, it vibrates molecules to give out heat.

The common material used for the construction of enclosures for shielding is metal, like copper, brass, and aluminum, silver, nickel, stainless steel, metalized plastics. Although such materials have good shielding performance, but it is low elasticity, heavy, high density, easy to corrosion, expensive. Weight in industries like the aircraft, transportation, and aerospace industries is costly. So there was a need for light weight, flexible, corrosion resistant and stronger material. Textile material fulfills all these requirements. So people started use of textile material as EM shield. Most of the textile material is electrically non conductive. So it was necessary to make textile material electrically conductive. There are various methods available to make textile material electrically conductive.

In the present research work, we choose commercially available polyester-cotton blended fabric and made it electrically conductive by coating it surface with silver metal with 1 , 3 and 5 micrometer coating thickness. We measured electromagnetic shielding effectiveness as per ASTM –D-4935 co-axial transmission method and achieved 90% electromagnetic shielding effectiveness.

At present no mathematical model and simulation is available presenting this electromagnetic shielding effectiveness phenomena. We want to model this electromagnetic shielding effectiveness using experimental data obtained in this research work and validate the mathematical model.

Problem 4

ESTIMATING THE FURNACE TEMPERATURE FOR A BAKERY OVEN USING RADIATION NETWORK ANALYSIS AND ESTIMATING BAKING TIME

Abstract:-

The baking of bread is the most fundamental process. Baking when carried out using a wood fired oven involves heat transfer mainly due to radiation from the furnace wall. The operating temperature of the furnace wall are raised in the range of 400-600 ℃ and the baking process is carried out until it reaches to 200 ℃. The oven in this case is first preheated without the load and large amount of heat is allowed to store in the refractory type surfaces of the oven. Once the desired temperature is achieved the oven is subjected to the actual baking process. The process of baking is continued until the furnace refractory wall retain the minimum desirable operating temperature required for the baking. The estimation of heat transfer under such conditions are very critical to estimate the actual baking time. The furnace under this will achieved steady state condition at operating point under no load condition. Once these conditions are achieved, heat input is switched off and the baking process is started. Since there is no addition of thermal energy, the baking process will take place at the expanse of the stored internal energy, and the furnace will act as a ‘lumped mass’ with unified temperature. The transient heat transfer condition is prevailed in the furnace for all subsequent baking processes. Radiation network approach can be applied in this case at two occasions, one at a steady state condition under no load and second at each different instances of time to predict wall temperature of the furnace.

Radiation heat transfer depends on the two components, one is space resistance and another is surface resistance. The space resistance depends purely on the geometry or view factor of the different walls and is independent of temperature. On the other hand surface resistance depends on the wall emissivity. The values of emissivity can be obtained at steady state condition and the same can be assumed to remain constant during transient operating conditions. Applying energy equation, the wall temperature and heat transfer to the load can be predicted at different instances of the time. For each subsequent lapse of time the baking time for a given load will increases and can be determined by applying and solving radiation network for different time step. Finally, the baking time at different temperature for a fixed load can be obtained.

Deputy Director (Academic cooperations and exchange programs)

As a Deputy Director of Office of International Affairs, Prof Vanisha Nambiar (M.Sc, Ph.D., Nutrition), a full-time Professor in the Department of Foods and Nutrition of this University, works in tandem with the Director of Office of International Affairs in all global engagements of The Maharaja Sayajirao University of Baroda.

Deputy-Director – Office of International Affairs:
vanisha.nambiar-fn@msubaroda.ac.in
M:+91968760593

Nodal Officer (Faculty of Social Work)
M: +919913348243

Assistant Professor
B.A. Psychology, MSW, PGDCCP, UGC- NET
Experience: Teaching: 1 Years, Research: 3  Years.
Areas of Interest: Gender Studies, Community Organisation, Mental Health.
Email: jijo.abraham-sw@msubaroda.ac.in

International Coordinator, ICCR
Nodal Officer (Faculty of Performing Arts)

Assistant Professor, Syndicate Member
Diploma in Vocal Music with Durgatai Karnik award in 1985
Bachelor of Performing Arts with Gold Medals in 1987
Master of Performing Arts with Gold Medals in 1989,
UGC-NET, Ph.D.
Experience: 14 Years at University level and 15 years as a freelancer.

He holds an excellent record as an artist and an academician. He has widely travelled in many countries including the USA, UK, Europe, Caribbeans, Africa, and Asia, for the promotion of Indian arts and culture.

Areas of Interest: Performance, Innovative teaching, Performing Arts Management, Social work through Music, Music workshops at the national and international level, Research and documentation of rare Ragas and compositions, Experimental music, compositions, Art and administration

Email: rajeshgkelkar@gmail.com
M: +919924260175

Nodal Officer  (Faculty of Science)
M: +919428691041

Asst. Professor
M S University of Baroda

Nodal Officer (Faculty of Journalism and Communication)
M: +918000038789

Assistant Professor
Ph.D., Thesis on Value Based Education, Master of Communication Studies, Bachelor of Arts (Political Science)
Experience: 6 years in Academics, and 3 years as Content Writer in New Media
Areas of Interest: Communication Theory and Models, Media Law and Policy, Communication Research
Email: maitra.pratibha-jc@msubaroda.ac.in

Nodal Officer (Polytechnic)
M: +919825815997

Lecturer (Applied Mechanics)
B.E. (Civil), M.E., Ph.D (pursuing)
Experience: Teaching 13 years Industry 4.5 years
Area of interest: earthquake engineering, geotechnical
Paper published 05, Paper presented 03.
Email: doshi.dipali-polyappmech@msubaroda.ac.in

Nodal Officer (Faculty of Law)
M: +919428167804

Assistant Professor
Master of Law
Experience: Teaching – 7 Years
Areas of Interest: Business Law; EXIM, Tax Laws, The Constitution of India
Email: krshiv2006desai@gmail.com

Nodal Officer (Faculty of Fine Arts)
M: +919898351788

Assistant Professor
Masters of Fine Arts, Sculpture, Bachelors of Fine Arts, Sculpture, Diploma in Industrial Ceramic Design,
UGC-NET Examination Qualified.
Experience: Worked as a Visiting Lecturer at the Faculty of Fine Arts, MSU, Baroda, for Pottery, Ceramics and Sculpture. December 15th 2002, April 30th 2003. Worked at Pidilite Industries Limited, Mumbai, as a Product Specialist, Consumer Products Art Material. Jan. 2004 to May 2004 Worked at Ceramic Studio – ‘MUD, SWEAT & TEARS’ at New York, USA as a studio potter. July 2004 to October 2004. Conducted and Assisted Design Workshop as a Ceramic Designer, at KPMA (Khurja Potters Manufacturers Association), Organized by NID Delhi cell, IHC and CGCRI Khurja. It was sponsored by DC Handicraft to give design inputs to the artist of various ceramic industries at Khurja.

Email: rutvijmistry@gmail.com

Nodal Officer (Faculty of Arts)
M:+919714517101

Assistant Professor, Head & Dean of Students
Ph.D.in Sanskrit, M.P.A. (Vocal Music),
UGC-NET 1999 (Sanskrit)
Experience: 21 Years Teaching and Research
Areas of Interest: Vedantashastra, Vedic, Classical & Modern Sanskrit Literature, Manuscriptology and Indian Classical Music.
Email: shweta.jejurkar-spp@msubaroda.ac.in

Nodal Officer (M. K. Amin Arts and Science College and College of Commerce)
M:+919727076465

Assistant Professor (CES) Zoology
Ph.D. in Zoology Faculty of Science, MSU.
Research areas: Animal Taxonomy and Biodiversity, Ecology and Environment of Aquatic Ecosystems.

Email: khushali.pandya-zoo@msubaroda.ac.in

Nodal Officer (Faculty of Education and Psychology)
M:+919925270529

M.Sc., M.Ed., M.Phil., Ph.D. (Education), Post Graduate Diploma in Higher Education (PGDHE), Post Graduate Diploma in Distance Education (PGDDE), Diploma in Performing Arts (DPA-Vocal)
Designation: Professor Department of Education
Experience: 30 Years (Teaching), including 20 Years (Research work)
Areas of Specialization:  Teacher Education, Value Education, Life Skills Education, Research Methodology, Teaching of Mathematics, Principles and Techniques of Teaching
No. of the Book Published: 01 [ Life Skills Oriented Teacher Education with ISBN: 978-93-5288-295-3]
Research Projects and consultancy: 04 State level Research Projects completed
No. of Papers Presented in International & National Seminars/Conferences: 07 & 28
No. of Published Research Papers / Articles in Journals / Edited Volumes:   41
Academic contribution in the total number of National Regional / State level Seminars / Conferences / workshops / Training Programmes: 112

E-mail: pathak.satish-edu@msubaroda.ac.in

Nodal Officer (Faculty of Technology and Engineering)
 M: +919974568591

Assistant Professor (Stage 3)/Applied Physics
PostDoc: BOYSCAST Fellow (DST, New Delhi/UT, Austin, Texas, USA)
M.Sc., Ph.D.
Work Experience: 20 Years of Experience
Email: nkacharya-apphy@msubaroda.ac.in

Nodal Officer (Faculty of Medicine)
M: +919879592198

MBBS, DCP, Masters in Biochemistry
PG in QM, Principal Assessor NABH, Principal Assessor Kayakalp, Principal Assessor NQAS, Assessor NABL
Regional trainer for MET

Email: margeyi@hotmail.com

Nodal Officer (Faculty of Family and Community Sciences)
M: +919726859750

Associate Professor
Teaching Exp – 22 years
Coordinating Master Programme and Rural Extension Programme at Departmental Level
Email: maniar.avani-extcomm@msubaroda.ac.in

Foreign Student Advisor

Dr. K. Krishnan is a Professor in the Department of Archaeology and Ancient History and also the Dean, Faculty of Arts at the Maharaja Sayajirao University of Baroda. His areas of research include Artifact Analysis and Interpretation using the traditional archaeological methods as well as methods from material sciences to seek answers or explanations to cultural processes such as exchange, trade, migration, etc., Ceramic Petrology, Ancient Technology, Environmental Archaeology, Harappan Studies, Origin and Development of Urbanism in South Asia and Intangible Heritage. His research has enabled him to work towards developing a methodology for analyzing fine wares, understanding craft specialization, assessing the development of technology and its impact on ancient South Asian Society. These studies have inspired several students from South Asia, Europe and America to conduct research on South Asian Ceramics. In addition to this, he has worked towards appreciating and reconstructing palaeo-climate in central and western India. He has published three books (one edited), more than 60 research articles. He has carried out his research work in collaboration with researchers from various institutions in India, UK, USA, Sri Lanka, Pakistan, Oman, Nepal, Bangladesh, Belgium, France, and Australia.

Foreign Student Advisor – Office of International Affairs:
krishnan.msu@gmail.com
M: +919427015168

Director

Prof. (Dr.) Dhanesh Patel is a Full-time Professor of Applied Mathematics at the Faculty of Technology and Engineering. He was DAAD Fellow (Germany) during 1999-2001. He worked as the Head, Department of Applied Mathematics and Director Computer Centre, The M.S. University of Baroda. He has also served as Deputy Director of M. Sc. (Bioinformatics), M.Sc. (Financial Mathematics), PG Diploma in Scientific Computing And Industrial Mathematics, PG Diploma in Computer Applications Programme. He also served as a Vice-Dean, Faculty of Technology and Engineering and I/C Dean Faculty of Technology and Engineering. He was also Director, Centre for Industrial Mathematics. He visited several countries which include USA, UK, Europe, Africa and Asian nations. Apart from research and teaching, he is very much interested in International relation and International academic collaboration. As the Director of International Affairs, he facilitates and implements the University’s mission of global engagement and efforts to further enhance the international visibility and its recognition as a major international educational and research centre.

Director – Office of International Affairs:
director-oia@msubaroda.ac.in
M: +91-9879335246

Please note the following:

[A] Please remember that there will be no Entrance Test for International students to get admission into Certificate, Diploma, Undergraduate, Post Graduate, PG Diploma, Ph.D…

[B] There are some courses whose admissions are given by the Admission Committee for Professional Courses (ACPC), Govt. of Gujarat (http://www.jacpcldce.ac.in/index.asp) and hence it cannot be handled at the university level. The details of the respective faculties and Courses are as follows:

1. Faculty of Technology and Engineering:
   • B.E.( Bachelor of Engineering)(Civil, WREMI, Mechanical, Electrical, Chemical, Electronics, Computer Science, Metallurgy, Textile Engineering, Textile Processing, Textile Technology, )
   • M.E.( Master of Engineering )(All Branches)
   • MCA
   • DTC,DTT

2. Faculty of Pharmacy
   • Pharm
   • Pharm(All Branches)

3. Faculty of Management studies
   • B.A.(Master of Business Administration)

However, the Master courses and Post Graduate Diploma courses run by the Department of Applied Mathematics, Applied Physics, Applied Chemistry, Metallurgy dept(ONLY ME in Welding Technology) are done at the university level.

In a similar pattern, there are some courses whose admissions are given by Admission Committee For Professional Diploma Courses, Govt. of Gujarat http://www.acpdc.in/ and hence it cannot be handled at the university level. The details of the respective faculty and Courses are as follows:

4. Polytechnic
   • Diploma in Civil, Mechanical, Electrical, Petrochemical, IT (After 10^th Grade)

In a similar pattern, there are some courses whose admissions are given by the Admission Committee for Professional Under Graduate Medical Courses (ACPUGMEC), Govt. of Gujarat    http://www.medadmgujarat.org/  and hence it cannot be handled at the university level. The details of the respective faculty and Courses are as follows:

5. Faculty of Medicine
   • MBBS (Medicine and Bachelor of Surgery)
   • BDS (Bachelor of Dental Surgery)
   • Bachelor of Physiotherapy
   • All Master Courses